Command: CC (Configure Console). Can be used in online, offline or secure state.
Function: To set the baud rate and word format for the Console port.
Inputs:
Console baud rate (see example
below).
Console word format (see example below).
Outputs: None.
Errors: None.
Example:
Offline> CC <Return>
|
BAUD RATES |
WORD FORMATS |
||
|
1. |
300 |
1. |
7 bits, no parity, 1 stop |
|
2. |
600 |
2. |
7 bits, odd parity, 1 stop |
|
3. |
1200 |
3. |
7 bits, even parity, 1 stop |
|
4. |
2400 |
4. |
8 bits, no parity, 1 stop |
|
5. |
4800 |
5. |
8 bits, odd parity, 1 stop |
|
6. |
9600 |
6. |
8 bits, even parity, 1 stop |
|
7. |
19200 |
|
|
|
8. |
38400 |
|
|
In response to the prompts, enter the number of the
desired option or <RETURN> for no change.
Console baud rate: (current value = 1) 6 <Return>
Console word format: (current value = 2) 4 <Return>
After completing the procedure, reset the HSM by turning the keylocks to the online position and pressing the RESET button on the front panel. The new values do not take effect until this has been done.
The new settings remain operational (even after software updates) until the user changes them, or there is an alarm (in which case they return to default values).
The default settings for the Console port are:
9600 baud,
8 data bits,
1 stop bit,
No parity.